Fourms

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> Lester-Riley
Graham Gauld
post Sep 25 2006, 18:16
Post #1


Member
Posts: 849
Joined: September 04



I was a judge at a racing linked concours at San Marino in Italy put on by Fabrizio Violati of Maranello Rosso and you could have knocked me over with a feather when one of the cars that turned up was a Lester-Riley that had been built with a Riley engine and had the kind of 1955 Fibreglass body that could only be described the way in which Henry Manney would have described it " Give an Englishman a piece of Fibreglass and see what kind of a mess he can make of it" The car is owned by Gianni Marrabini and whereas I was very familiar with the Lester-MG's in the 1950's I did not know about the Lester-Riley. I would publish a picture but after a year of trying I still cannot manage to put a picture on this site despite the help of many TNF'rs. But if anyone knows anything about this car I would like to send Gianni the information. He did say that Ken Booth was apparanetly an owner at one time.
Go to the top of the page
 
+Quote Post
Paul Rochdale
post Sep 25 2006, 21:16
Post #2


Member
Posts: 1,084
Joined: September 04



Graham

On p.128 of Specialist British Sports/Racing Cars of the Fifties & Sixties by Anthony Pritchard (ISBN 0-85045-643-6) is a picture of the Lester-Riley coupe, reg no. 5 EME. As you say, it was a pretty ugly device.
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 25 2006, 21:20
Post #3


Member
Posts: 849
Joined: September 04



Thank you Paul .....that was a coupe....this one in Italy was a spyder. According to the owner there were two coupes built plus the spyder.
Go to the top of the page
 
+Quote Post
crossle51f
post Sep 26 2006, 10:04
Post #4


New Member
Posts: 8
Joined: September 06



Hello during the late 50s early 60s my father along with a David John Ashworth raced an ex monkey racing stables Lester MG reg no 5 eme. Their co was the" Lorraine car co" .The chassis was twin tube construction independant f/r suspension alfin drums ( inboard at the rear.) The engine was an mg xpag bored to1500cc c/w laystall lucas c/head when raced but used a riley 4/44 engine on the road.The body was a falcon mk 2 one piece fibre glass unit . A lot of work was carried out at Dunsfold at the Compasses after hours by Ray Sulley . It was towed in a converted caravan by a Delahaye 3.5 cabrio.
Go to the top of the page
 
+Quote Post
David McKinney
post Sep 26 2006, 11:17
Post #5


Member
Posts: 10,737
Joined: November 00



I take it the body in you father's day was an open two-seater?
5EME was a coupé when raced by the Monkey Stable in 1955
Go to the top of the page
 
+Quote Post
Paul Rochdale
post Sep 26 2006, 12:25
Post #6


Member
Posts: 1,084
Joined: September 04





Photo: © Specialist British Sports/Racing Cars of the 50s & 60s by Anthony Pritchard
Go to the top of the page
 
+Quote Post
David McKinney
post Sep 26 2006, 13:56
Post #7


Member
Posts: 10,737
Joined: November 00



That's the one, Paul
I didn't post the picture as I didn't think I could afford the copyright fee
Go to the top of the page
 
+Quote Post
crossle51f
post Sep 26 2006, 15:17
Post #8


New Member
Posts: 8
Joined: September 06



yes it was an open 2 seat sports car "C" type jaguar in appearance
Go to the top of the page
 
+Quote Post
Paul Rochdale
post Sep 27 2006, 09:26
Post #9


Member
Posts: 1,084
Joined: September 04





Photo: Graham Gauld
Go to the top of the page
 
+Quote Post
Sharman
post Sep 27 2006, 10:46
Post #10


Member
Posts: 1,229
Joined: September 05



Graham
RGS Atalanta tail fins
John
Go to the top of the page
 
+Quote Post
Ted Walker
post Sep 27 2006, 13:58
Post #11


Member
Posts: 1,051
Joined: November 01



Some lunatic has cut off the roof !!!!!!!!!!!!!!!!!!!!!!!!!!
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 27 2006, 15:37
Post #12


Member
Posts: 849
Joined: September 04



Ted:

As mentioned earlier our Italian friend said that as far as he knew there were two coupes built and one spider, the spider having a Riley engine. He did think the name Ken Booth was involved with the car but he also mentioned a name he thought was something like Jacobsen. He appears to have bought it in the 1970's. It is the Riley engine that intrigues me because most Lesters were MG engined. Everything about it screams originality - note the exhaust pipe - the awful Fibreglass body etc.
Go to the top of the page
 
+Quote Post
Sharman
post Sep 27 2006, 15:51
Post #13


Member
Posts: 1,229
Joined: September 05



Which Riley engine Graham?. The body is the right era for Dick Shattock and it has, as I said earlier, affinities with the RGS which looked like nothing on earth but went well.
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 27 2006, 16:04
Post #14


Member
Posts: 849
Joined: September 04



Sadly John, I was dashing about so much I never caught him with the engine cover open. He said it was a 1500 but I think it was written down on a piece of paper as an 1100. I will try and get his telephone number and give him a ring and see what else he can tell me.
I agree with you about the RGS Atalanta style. As you know the RGS is in Scotland with Barry Wood and my son Lance shared the car in a historic meeting at Dijon last year.

GG
Go to the top of the page
 
+Quote Post
Stoatspeed
post Sep 27 2006, 16:40
Post #15


Member
Posts: 232
Joined: June 06



This looks like a curiously malformed Daimler SP250 to me! maybe one that was left in the oven too long?
Love the camber angles on the action shot ... you can almost hear the scream of the overloaded outer front tyre!
Go to the top of the page
 
+Quote Post
Sharman
post Sep 27 2006, 18:24
Post #16


Member
Posts: 1,229
Joined: September 05



Graham
As well as building cars in kit, RGS also sold body shells is it possible..........?
John
Go to the top of the page
 
+Quote Post
Paul Rochdale
post Sep 27 2006, 21:35
Post #17


Member
Posts: 1,084
Joined: September 04



Gentlemen, Please. The RGS Atalanta bears almost no similarity to the Lester-Riley. This is a Rob Ryder photo.

Go to the top of the page
 
+Quote Post
Peter Morley
post Sep 27 2006, 22:07
Post #18


Member
Posts: 1,415
Joined: October 02



Originally posted by Graham Gauld
Ted:

As mentioned earlier our Italian friend said that as far as he knew there were two coupes built and one spider, the spider having a Riley engine. He did think the name Ken Booth was involved with the car but he also mentioned a name he thought was something like Jacobsen. He appears to have bought it in the 1970's. It is the Riley engine that intrigues me because most Lesters were MG engined. Everything about it screams originality - note the exhaust pipe - the awful Fibreglass body etc.


Given the car is in Italy it would not be surprising if Ken Booth was involved, Ken sold a lot of cars, especially to Italy during the 80s - I think he eventually swapped the rain in Preston for a lake in Italy?

Any idea where Ken is these days?
Go to the top of the page
 
+Quote Post
Ted Walker
post Sep 28 2006, 06:51
Post #19


Member
Posts: 1,051
Joined: November 01



Would love to see a PERIOD photo with the roof missing. Not convinced if the Riley engine would have been fitted in the 50s or later.
Go to the top of the page
 
+Quote Post
Peter Morley
post Sep 28 2006, 07:39
Post #20


Member
Posts: 1,415
Joined: October 02



Originally posted by Ted Walker
Would love to see a PERIOD photo with the roof missing. Not convinced if the Riley engine would have been fitted in the 50s or later.


Would be interesting to know what type of Riley engine - is it a real (e.g. pre-war 9 or 12/4) type, or a badge engineered BMC engine.
Go to the top of the page
 
+Quote Post
Sharman
post Sep 28 2006, 07:56
Post #21


Member
Posts: 1,229
Joined: September 05



Paul
Look on the 5os specials site under RGS much closer than you might think now, I have to say also that your photograph looks only vaguely like the Atalanta Jaguar of my youth
John
Go to the top of the page
 
+Quote Post
Sharman
post Sep 28 2006, 07:59
Post #22


Member
Posts: 1,229
Joined: September 05



Peter
More likely to be an RMA derivative than pre war I would have thought. What did John Horridge run in the Jehu-Riley?
John
Go to the top of the page
 
+Quote Post
Peter Morley
post Sep 28 2006, 10:10
Post #23


Member
Posts: 1,415
Joined: October 02



Originally posted by Sharman
Peter
More likely to be an RMA derivative than pre war I would have thought. What did John Horridge run in the Jehu-Riley?
John


John
Which Riley had the chain drive version of the 12/4? Was that an RMA or was the RMA a new engine?
Either would be pretty heavy, BMC versions presumably much lighter.
Will have to look up the Jehu-Riley.
Peter
Go to the top of the page
 
+Quote Post
Sharman
post Sep 28 2006, 10:51
Post #24


Member
Posts: 1,229
Joined: September 05



Peter
redface.gif Substantially the same engine but I am not sufficientently cognisant with Rileys to expand on the subject. There was a chap I knew (his father was a psychiatrist which may say something) with an RMA with 4 Amals on it. it also had a reworked cam with a lot of overlap. As the exhaust exited on the near side passing cyclists on the overun caused a certain degree of consternation.
John
Go to the top of the page
 
+Quote Post
Richard Cass
post Sep 28 2006, 15:17
Post #25


New Member
Posts: 16
Joined: June 04



The coupe Lester 5EME has the exhaust pipe outlet on the right (drivers) side, Riley engines, unless very very special are on the left. The colour picture of the open sportsracer looks like a Lister.
Go to the top of the page
 
+Quote Post
Sharman
post Sep 28 2006, 16:19
Post #26


Member
Posts: 1,229
Joined: September 05



Originally posted by Ted Walker
Would love to see a PERIOD photo with the roof missing. Not convinced if the Riley engine would have been fitted in the 50s or later.


Ted
As I suggested to Paul earlier, look on the 50s specials website, there is a recent photo of an open RGS (not the Atalanta) plus line drawings of the body in open & coupe forms. I don't think that Harry Lester built his own bodies except for the open wheel format. So they had to come from somewhere, they would not have been made in house especially as by the time the mid 50s arrived there were so many proprietry bodies in reinforced plastic to choose from.
JF
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 28 2006, 16:33
Post #27


Member
Posts: 849
Joined: September 04



I can confirm that the exhaust pipe on the Lester-Riley comes out on the left hand side and also it has the correct Lester badge on the nose. It is certainly not a Lister.
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 29 2006, 13:49
Post #28


Member
Posts: 849
Joined: September 04



As mentioned above I telephoned Gian Luigi Marbini regarding his car despite my less than perfect command of Italian. Though he has very little information about the car he was able to confirm the engine was a 1953 Riley 1500 engine and that as far as he was aware Harry Lester built two Coupes and two spyders of which his was one.
Go to the top of the page
 
+Quote Post
Sharman
post Sep 29 2006, 15:30
Post #29


Member
Posts: 1,229
Joined: September 05



Monkey Stable ?
Go to the top of the page
 
+Quote Post
Graham Gauld
post Sep 29 2006, 15:33
Post #30


Member
Posts: 849
Joined: September 04



Yes : Scimmia Stabile He did mention Monkey Stable when we first talked about the car last Saturday.
Go to the top of the page
 
+Quote Post
Ted Walker
post Sep 29 2006, 20:13
Post #31


Member
Posts: 1,051
Joined: November 01



Never seen a photo of a spyder version of this type. I remember several years ago selling some photos of the coupe to an owner who said that he thought the coupe was ugly so had the top removed( I think he was an American )
Go to the top of the page
 
+Quote Post
Sharman
post Sep 29 2006, 21:19
Post #32


Member
Posts: 1,229
Joined: September 05



I understand that the 2 coupes and the 2 spyders were never delivered as they were a year late and Jim Mayer was killed in a Cooper. The question is where did they go and to whom. When completed they would, I assume, have had 1500 MG units which if I recall correctly were a bit on the fragile side. An RMA which I now realise were based on the 12/4 with presumably chain cam drive as Peter said would be a more durable option. Relative weights anybody? I have asked questions of a garage which is looking after another Lester MG from I guess the same series
Go to the top of the page
 
+Quote Post
fivestar
post Oct 1 2006, 03:27
Post #33


Member
Posts: 171
Joined: January 06



For what it is worth, there is an article in the 8 April 1955 issue of AUTOCAR "Interesting Competition Cars" - M FOR MONKEY STABLE, which has a cut a way drawing of the Coupe, showing the fins. I can take a digital photo and post of any one is interested.
The article states that four cars will be built. 2 coupes (M15) with 1.5L MG engines and 2 spyders (M11) with 11oocc Coventry Climax engines.
Go to the top of the page
 
+Quote Post
Sharman
post Oct 1 2006, 08:51
Post #34


Member
Posts: 1,229
Joined: September 05



Sack cloth and ashes, I have been talking through my backside, the 12/4 started as chain drive but very quickly became gear driven, I TOLD you I was not au fait with Rileys.
Go to the top of the page
 
+Quote Post
Allan Lupton
post Oct 1 2006, 09:19
Post #35


Member
Posts: 1,376
Joined: March 06



Are you sure it's a pre-BMC Riley motor? The RM was quite heavy and not many were developed as racing engines, but the BMC B series as in the Riley 1.5 of 1958ish was the forerunner of the MGB and quite early on had the HRG-Derrington cross-flow alloy 'head available as a go-faster mod.

Also don't discount RGS as the body just because it is smaller than the RGS-Atalanta/Jaguar. There was an RGS-MG which we've seen racing a lot in recent years which has some similarity
Go to the top of the page
 
+Quote Post
Peter Morley
post Oct 1 2006, 15:05
Post #36


Member
Posts: 1,415
Joined: October 02



Originally posted by Sharman
Sack cloth and ashes, I have been talking through my backside, the 12/4 started as chain drive but very quickly became gear driven, I TOLD you I was not au fait with Rileys.


I think it is the other way round - our mid 30's 12/4s were always gear driven and I remember being shown a late engine (either just pre or just post war) that was chain driven) - I don't know enough to know if the very first ones might have been chain drive, but the majority are gear drive.

12/4s have a huge tall cast iron block (with integral gearbox bellhousing) which is pretty heavy, far more substantial than a BMC type engine.
Go to the top of the page
 
+Quote Post
humphries
post Oct 1 2006, 15:11
Post #37


Member
Posts: 888
Joined: February 03



According to my records T. Bleasdale entered a Lester-Riley in a number of races in 1957.

At Snetterton (31 March) he was a non-starter, but he appeared at Brands Hatch (9 June), and was entered in the Norbury Trophy, no less, at Crystal Palace the next day. Teasdale had another busy weekend, supposedly, as he was entered at Silverstone (27 July) and then the next day at Snetterton. He was at Silverstone (5 Oct) and at Oulton Park (12 Oct). He never featured in the results.

The engine capacity was stated as 1496 cc and on occasion he was entered by Ecurie Pendle.

This car may have been the ex-Ecurie Bullfrog car, but that would make it pre-1955. The two M15s and M11s were all coupes.

John
Go to the top of the page
 
+Quote Post
Sharman
post Oct 1 2006, 16:53
Post #38


Member
Posts: 1,229
Joined: September 05



Originally posted by Peter Morley




12/4s have a huge tall cast iron block (with integral gearbox bellhousing) which is pretty heavy, far more substantial than a BMC type engine.


That is what I said Peter only the very early engines were chain drive ie on introduction in 1934

Humphries- Ecurie Bullfrog was John Horridge which is why I raised the Jehu Riley topic

Allan -The 1.5 B type engine was not produced before 1954 and was not used under the Riley badge engineering scheme until 1957 hence it would not be described as a Lester Riley in 55, even if it was retro fitted it would surely have remained true to the MG name. The more I look at this the more convinced I become that the body is RGS, as I said not the Atalanta-Jaguar but the smaller version.
Go to the top of the page
 
+Quote Post
David McKinney
post Oct 1 2006, 18:38
Post #39


Member
Posts: 10,737
Joined: November 00



Originally posted by Sharman
The 1.5 B type engine was not produced before 1954 and was not used under the Riley badge engineering scheme until 1957 hence it would not be described as a Lester Riley in 55

It would still have been possible to retro-fit a pe-war 1500 Riley engine, either a four or six
Go to the top of the page
 
+Quote Post
humphries
post Oct 1 2006, 19:55
Post #40


Member
Posts: 888
Joined: February 03



The link between Ecurie Bullfrog and Beasdale's 1957 Lester-Riley is tenuous but...

In 1954 J.H.Greenwood raced a Lester-MG under the Ecurie Bullfrog banner along with others in various cars including Horridge in the Jehu-Riley.

In 1955 Greenwood again raced the Lester whilst Horridge acquired a Lister chassis and inserted a Riley engine, possibly from the Jehu. This Lister-Riley was raced not only in the UK but took part in the Bol d'Or 24 Hour race although it retired with big-end failure. Now Doug is the Lister specialist but I noticed in his "Powered by Jaguar" book that there were a number of chassis supposedly for Bristol engines about which Doug has no information. The chassis must have been one of those. The intriguing thing is that the Lister-Riley had a fibreglass body. In October it took part in Fibreglass Trophy at Brands Hatch, a race restricted to cars with that type of body. Therefore it is possible the team's Lester-MG was also clothed in a fibreglass body, maybe of the same type. Photographic evidence is required.

In 1956 John Horridge raced a Lister-Bristol, again with a fibreglass body, and again raced in the Brands Hatch fibreglass race. It is quite likely that this car was in fact the 1955 Lister-Riley. It is possible that the Riley engine from the Lister was then put into the Lester. There is no record of Greenwood racing a Lester-MG in 1956 nor any mention of a Lester-Riley racing in 1956.

So was the creation of the Lester-Riley by Ecurie Bullfrog or a totally separate exercise by Beasdale?

John
Go to the top of the page
 
+Quote Post

2 Pages V   1 2 >
Reply to this topicStart new topic

 

Bulletin Board Rules Time is now: 3rd September 2010 - 01:42